CNC Vertical Boring Mills

124” Bullard Vertical Boring Mill with Fanuc OiTD Controls

• Capable of 140" Swing

120” Schiess Vertical Boring Mill with AUTOCON Dynapath 40-T Controls

• Capable of 153 ½” Diameter and Height of 103.5” Under the Rail

118” Monarch Vertical Boring Mill with Fanuc OiT Controls

• Capable of 150” Diameter and Height of 118” Under the Rail

108” Bullard Vertical Boring Mill with Fanuc 16-TT Controls

• Equipped with Twin Rams and Capable of Height of 96” Under the Rail

86” Bullard Dynatrol Vertical Boring Mill with Fagor Controls

• Equipped with Ram & Turret  and Capable of 86” Under the Rail

72” G & L Vertical Boring Mill with Fanuc Controls

• Capable of Height of 84" Under the Rail

HNK Model VTC 16/20R with Fanuc 31i Control

• Equipped with a 63” Table with a 78” Swing

62” Bullard Dyn-Au-Tape with AUTOCON Dynapath Controls

• Equipped with 12 Position Tool Changer

56” Bullard Dyn-Au-Tape with with Fanuc OiT Controls

• Equipped with High Column and Capable of Height of 68” Under the Rail

52” G & L Vertical Boring Mill

• Capable of Height of 68” Under the Rail

49.2” Schiess Vertical Boring Mill with Fanuc OiTD Controls

• Capable of 72” Diameter and Height of 62” Under the Rail

48” G & L Vertical Boring Mill with Fanuc OiTC Controls

• Capable of 62” Diameter and Height of 62” Under the Rail

CNC Engine Lathes

6642 LeBlond CNC Lathe with Fanuc OiTC Controls

• Wide Bed length and 240" between Centers

6040 American CNC Lathe with Fanuc 16T Controls

• Capable of 50” Diameter Chuck and 60” Swing over the ways
• Capable of 40” Swing over the cross-slide 20’ between Centers
• 12 ½ Spindle Bore

5035 American CNC Lathe with Fagor 8040 Controls

• Capable of 50” Swing over the ways and 108” between Centers
• Capable of 35” Swing over the cross-slide

Daewoo PUMA 18 CNC Lathe with Fanuc 16T Controls

CNC Machining Centers

Orion 1250 Machining Center with G & L 8000 Controls

• Equipped with 2 Pallet System

(2) Toyoda FH-80 Horizontal Machining Centers with FANUC 15-M Controls

• Equipped with 2 Pallet Shuttle System and 128 Position Tool Changer

Johnford VMC-1600HD Vertical Machining Center

• 63” x 31.5” x 28” Travels with 6,000 rpm Spindle
• 50 Taper Machine with 1000 psi Coolant thru Spindle

CNC Double Column Machine Centers

Mitsubishi MVR40 236” X 118” with Riser Block for Extended Vertical Height

• with Fanuc 31i Control
• 147” between Columns
• Table Load Capacity 77,000 lbs

Mitsubishi MVR30 118” X 78” with 64" Vertical Height

• with Fanuc 31i Control
• 100” between Columns
• Table Load Capacity 44,000 lbs
• Live 90° Head offering Full Contouring

Mitsubishi MVS25A 165” X 98” with 72” Vertical Height

• Fanuc 15M Controls
• 98” between Columns
• Table Load Capacity 44,000 lbs

Johnford DMC-2100SH Double Column Machining Center

• 82.7” X 70” X 31.5” Travels and 6,000 rpm Spindle
• 50 Taper Machine with 1000 psi Coolant thru Spindle
• Table Load Capacity 22,000 lbs

Johnford DMC-2100 Double Column Machining Center

• 80.7” x 44” x 31.5” Travels
• Fanuc 18M Controls

CNC Horizontal Boring Mills

Giddings and Lewis 5” Spindle with FANUC 16iM Controls

• 72” Vertical Height with 120” Cross Travels

Giddings and Lewis Fraser 5” Spindle with AUTOCON Dynapath Controls

Lucas 5” Spindle with AUTOCON Dynapath 40 Controls

• 72” Vertical Height with 120” Cross Travel

HNK HB-150 5.9” Spindle with Fanuc 31i Control

• Capable of 90” Vertical Height x 118” Cross Travel x 63” Column travel
• 44,000 lbs Table Load Capacity
• Equipped with 87” x 79” Built-in Rotary Table
• 40 Station Tool Changer

Lathes

36” Monarch T-Lathe

26” Lodge and Shipley 9 1/2” Hollow Spindle with 96” between Centers

20” x 96” Axelson Engine Lathe with Taper Attachment

Graziano SAG 22

Floor Mills

8” Giddings and Lewis Floor Mill with Digital Readouts

• Capable of 144” Vertical Travel with 144” Cross Travel
• Equipped with:
  • (96” x 144”) Gear Driven Rotary Table
  • 48” Facing Head
  • 90° Milling Attachment
  • Tail Stock for Line Boring

7”Lucas Floor Mill with Digital Read Outs

• Capable of 96” Vertical Height and 25’ Cross Travel
• Equipped with (96” x 96”) Gear Driven Rotary Table

6” Giddings and Lewis Floor Mill with Digital Read Outs

• Capable of 86” Vertical Travel with 144” Cross Travel
• Equipped with Powered Rotary Tables

Horizontal Mills

• 4” Giddings and Lewis Horizontal Boring Mill
• 3” Giddings and Lewis Horizontal Boring Mill with Digital Read Outs

Mills

• Bridgeport Mill
• Comet (Bridgeport Style) Mill

Drill Press

• Cincinnati Bickford 7’ Radial Arm Drill Press

Saws

• Marvel #8 Saw
• TF24RS DoAll

Cranes

• (6) 15 Ton Bridge Cranes
• 10 Ton Bridge Crane
• 5 Ton Bridge Crane
• 2 Ton JIB Crane
• 1/2 Ton JIB Crane

Forklifts

• 52,000 lb Wiggins Forklift
• 36,000 lb Hyster Forklift
• 30,000 lb Clark Forklift
• (2) 8,000 lb Forklifts
• 6,000 lb Forklift

Inspection Tools Featuring 8.2’ Romer Model 7525 Portable CMM